9000 is a one-component, neutral-curing silicone sealant developed by our company. It is used not only for building sealing, but also for sealing the joints of glass roofs, coated glass and lens glass, etc. When 9000 is used, it is squeezed into the part to be sealed with a squeezing gun from the sealant cartridge, and the sealant absorbs the moisture in the air at room temperature and cures into an elastomer to form an effective seal.
9000 is one-component, easy to use, with good extrudability and thixotropy in the temperature range of 4°C to 40°C. It can be applied directly by extrusion with a glue gun.
Neutral curing, non-corrosive.
Good adhesion with glass, metal, ceramics and many other materials, no need to use primer for most substrates, widely used.
Non-toxic when fully cured.
Bonding and sealing of indoor and outdoor glass and doors and windows.
Bonding and sealing of various metals and mirror glass.
Adhesive sealing for glass and other materials of light shed.
Various other occasions suitable for transparent sealant.
●Restrictions on use
Cannot be used as structural sealant.
Not suitable for all materials that will ooze grease, plasticizers or solvents, such as the surface of oil-impregnated wood.
Not suitable for use in dense, unventilated locations where the sealant needs to absorb moisture from the air to cure
Not suitable for use on frosty or wet surfaces.
Not suitable for use in areas subject to continuous water immersion or year-round moisture
Not suitable for sealing polycarbonate materials.
Not suitable for use on copper, lead and galvanized metal surfaces.
9000 is packed in 300ml (1×24pcs) plastic tubes.
9000 is translucent in color.
Storage and expiration date
9000 should be stored in a cool and dry place below 27°C. The storage period is 9 months from the date of manufacture.
This product is not toxic when fully cured, but eye contact should be avoided until cured. If eye contact occurs, flush with plenty of water and seek medical attention; avoid contact with children if the product is not cured. This product will release ketoxime substances during the curing process, attention should be paid to ventilation in the construction and curing area to avoid adverse effects on people due to the concentration of these substances.
Generally no maintenance is needed, if the sealant seam is broken, replace the damaged part, just use solvent to remove the accumulated dirt, and then fill with sealant.
It is the responsibility of the customer to test the proposed sealant application accordingly and to determine if the performance meets the customer's application requirements.
You have no items to require